Device Settings; Usable Device Specific Settings; Paper Type Setting - Epson T88IVP - TM Two-color Thermal Line Printer Application Manual

2.4 Device Settings

The following explanation is about the settings for TM-T88IV.

2.4.1 Usable Device Specific Settings

For the TM-T88IV, the following device specific settings are settable by the
SetupPOS utility. For the detail, please refer to the corresponding part of the
Section 2 of "EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT
GUIDE POSPrinter (TM Series)"
Tab
General
Paper
Bitmap
Color Bitmap
Status Log
Default Value
Printing Properties
*1
The operations differ by the firmware versions. See the corresponding part of the
section 2 of this manual.
*2
Available only for the Multilingual character model.

2.4.2 Paper Type Setting

The TM-T88IV models support the following paper type. After adding the
TM-T88IV by the SetupPOS utility, open the "Device Specific Settings" dialog box.
In the "Paper" tab the paper type could be selected..
The settable paper types are as follows:
• Normal
• 2-Color Thermal
The default paper type is set to Normal.
Disable panel buttons
Assume print complete when data output finishes
Ignore firmware version check
Homogenize Error Codes
Output complete timeout [s]
Paper Type
Paper Width [mm]: LineWidth [dot]: LineCharsList
TMFlogo...
Method
Brightness
Primary
ERROR
OFFLINE
Log file name (full path name)
Maximum file size [KB]
*2
Multilingual font
Receipt Characters per Line
Receipt Line Spacing [dots]
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T88IV)
Settings
*1
8
Version 2.65 Jul. 2009