Epson T88IVP - TM Two-color Thermal Line Printer Application Manual page 8

4) Ethernet Port
DIP-SW1
No. Setting
1 OFF
2 OFF
3 OFF
4 OFF
5 OFF
6 OFF
7 OFF
8 OFF
It is possible to change the settings of DIP-SW1-1 (Auto line feed) and
DIP-SW1-2 (Specification of the received buffer capacity), but it is recommended
to leave them OFF.
Set DIP-SW2-3 and DIP-SW2-4 (Specification of the print density) to match the
environment of use.
Make other settings in accordance with the settings described above.
When using with the power saving mode, set DIP-SW2-3 and DIP-SW2-4 to ON.
APPLICATION DEVELOPMENT GUIDE
DIP-SW2
No.
Recommended
Recommended
Fixed at OFF
Fixed at OFF
Fixed at OFF
Fixed at OFF
Fixed at OFF
Fixed at OFF
5
POSPrinter (TM-T88IV)
Version 2.65 Jul. 2009
Setting
1 OFF Recommended
2 OFF Fixed at OFF
3 OFF Settable
4 OFF Settable
5 OFF Fixed at OFF
6 OFF Fixed at OFF
7 OFF Fixed at OFF
8 ON Fixed at ON