Loading Place Settings - GE Profile CDW9000 Series Owner's Manual

Loading the dishwasher racks.
Extra Rack Features (onsomemodels)
Cutlery Tray
The cutlery trag holds up to 4 large knifes
such as a carver, chef's knives, bread knife,
etc., that are too tall to fit in the silverware
basket.
Hook the trag onto the rear of the upper rack.
Lag the knives between the guides
(as shown).
These tines fold down
Bowl Tines
The special large-bowl tines in the lower rack
add flexibility to your loading pattern. They
are useful for serving bowls or other large
bowls.
To use the bowl tines, fold down the
2 rows of flex tines in front of the bowl
tines and load bowls just as SOUwould
in the upper rack.
Large-bowl tines
Loadingplacesettings...
Follow these guidelines for loading 10 place settings. Features and appearance of racks and silverware baskets mag
vary from your model. NOTE:Silverware should be individually loaded into the slots on the silverware basket lid.
IF_fYL 7/V/_ _ _/W/k_It&
Jl f f I I If I 7 I If I I I_€=L_ /ll[_\lll Iltl
Upper Rack--lO place settings Lower Rack--lO place settings
Follow these guidelines for loading 12 place settings. Features and appearance of racks and silverware baskets mag
vary from your model. NOTE: Silverware should be individually loaded into the slots on the silverware basket lid.
%
14 Upper Rack--12 place settings Lower Rack--12 place settings