Buzzer
The buzzer beeps for 0.1 second at a time. These beep sounds are combined in various
ways, as shown below, to indicate different meanings. In the following table, each "
stands for one beep.
Status
3EL code
No beeps.
No beeps.
Illegal paper
Recognition of
l
operation
.
Micro feed
Epson FX-870/1170
Table 1-21. Buzzer Functions
Sound
Sounds when a BEL code is received.
A carriage error has occurred.
(Indicators blink sequentially in the
clockwise direction.)
(Indicators blink simultaneously.)
Paper in the CSF has run out.
Paper was not present at the start of a
self-test.
A sheet could not be ejected from the
CSF.
Anotherpaperdetectionerroroccurred:
With single-sheet feed selected, no
paper is present.
Continuous paper can't be loaded.
Paper runs out after the PAPER FEED
button is pressed.
(continuously till corrected)
The release lever was changed while
there was paper in the paper path.
Change the lever again or remove the
paper in the path to stop the sound.
Power-on operation (self test, hex
dump, default setting, or power-on)
CSF bin -1 selected.
CSF bin -2 selected.
The adjusted value set with micro feed
is the same as the factory setting value
(loading position or tear-off position).
(continuously until button is released)
The micro feed value has reached its
upper or lower limit.
Printer Features
D e s c r i p t i o n
l
1-27