Panasonic Viera TX-P46GT30B Operating Instructions Manual page 40

Menu Item
Equaliser
Balance
Headphone Volume
Surround
Auto Gain Control
Volume Correction
Speaker Distance to Wall
Preferred Multi Audio
NICAM
SPDIF Selection
HDMI1 / 2 / 3 / 4 Input
Audio Description
Volume
Speakers
Headphones
Reset to Defaults
40
Adjustments / Configurations (alternatives)
Adjusts the frequency level to suit your favourite sound quality
•
This function is available when [Mode] is set to [User].
•
Select the frequency and change the frequency level by using the cursor button.
•
If you want to enhance the bass sound, raise the level of the lower frequency. If you
want to enhance the treble sound, raise the level of the higher frequency.
•
To reset the levels of each frequency to the default settings, select the [Reset to
Defaults] by using the cursor button, and then press the OK button.
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings [Off] / [V-Audio] / [V-Audio Surround]
[V-Audio] : Provides a dynamic enhancer of width to simulate improved spatial effects
[V-Audio Surround] :
Provides a dynamic enhancer of width and depth to simulate improved spatial effects
Automatically regulates large sound level differences between channels and inputs
[Off] / [On]
Adjusts the volume of individual channel or input mode
Compensates for the distance between the speakers and the wall [Over 30cm] /
[Up to 30cm]
•
If the distance between the TV and wall is over 30 cm, [Over 30cm] is recommended.
•
If the distance between the TV and wall is within 30 cm, [Up to 30cm] is
recommended.
•
Selects the preferred language for digital channel multi audio (depending on the
broadcaster) [English] / [Welsh] / [Gaelic] / [Irish]
Near Instantaneous Companded Audio Multiplex
Reproduces NICAM stereo sound [Off] / [On]
•
Off if reception is poor (FM monaural sound)
•
Analogue mode only
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT and
HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto] : Dolby Digital Plus, Dolby Digital and HE-AAC (48 kHz) multi-channel are output
as Dolby Digital Bitstream.
MPEG is output as PCM.
[PCM] : Digital output signal is fixed to PCM.
•
For freesat, DVB mode, Other Sat / Satellite, network video contents (p. 92) or Video
mode of Media Player (p. 78)
•
ARC (Audio Return Channel) : A function of digital audio output using HDMI cable
Select to fit the input signal [Digital] / [Analogue] (p. 110)
[Digital] : When sound is carried via the HDMI cable connection
[Analogue] : When sound is not carried via the HDMI cable connection
•
HDMI input mode only
Narration settings for visually impaired users [Off] / [Auto]
Set to [Auto] to activate the narration sound track when available on the broadcast
•
The availability of audio description sound track is indicated by [AD] in the
information banner (p. 19).
•
For freesat or DVB mode
Adjusts the volume for Audio Description
•
DVB mode only
Set to [On] to activate the description sound track from TV speakers [Off] / [On]
•
DVB mode only
Set to [On] to activate the description sound track from headphones [Off] / [On]
•
DVB mode only
Press the OK button to reset the present Sound Mode, [Balance], [Headphone Volume]
and [Surround] to the default settings