Panasonic Viera TX-P46GT30B Operating Instructions Manual page 15

4. Select [Yes]
4
Access Point Settings
Encryption key is set to:-
XXXXXXXX
Select 'Yes' to confirm.
Select 'No' to change.
Yes
5. After the access point setting is finished, perform the connection test
Connection Test
Check access point connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection for VIERA Connect.
6. Go to the next step
(Press twice)
[WPS(Push button)]
1. Press the WPS button on the access point until the light flashes
2. Connect the Wireless LAN Adaptor and the access point
WPS(Push button)
1) Please press the 'WPS' button on the access
point until its light flashes.
2) When the light is flashing select 'Connect' on
TV.
If you are unsure, please check the instruction
manual of the access point.
Connect
3. After the access point setting is finished, perform the connection test
Connection Test
4. Go to the next step
(Press twice)
Input Owner ID
5
Owner ID
Please enter new PIN
PIN
•
Make a note of the PIN number in case you forget it. The PIN number cannot be reset.
•
You can input or change the Owner ID later.
•
To skip this step
EXIT
•
This step will be skipped in the Auto Setup after [Shipping Condition] (p. 62) is performed.
•
To re-enter the encryption key, select [No].
•
If the connection has failed, check the encryption key, settings
No
and positions of your access point. And then, follow the on screen
instructions.
4
•
Ensure that your access point supports WPS for this setup.
•
WPS : Wi-Fi Protected Setup™
•
If the connection has failed, check the settings and positions of your
access point. And then, follow the on screen instructions.
Check access point connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection for VIERA Connect.
4
Please enter your own choice of PIN number, name, etc. to help the police
to crack crime.
* * * *
[Owner ID] (p. 63)
select
set
: succeeded
The test is successful and the TV is connected to the
network.
: failed
Check the settings and connections. And then select
[Retry].
•
To set manually, select [Manual] and set each item. For
details (p. 90)
: succeeded
The test is successful and the TV is connected to the
network.
: failed
Check the settings and connections. And then select
[Retry].
•
To set manually, select [Manual] and set each item. For
details (p. 90)
15