Panasonic Viera TX-P46GT30B Operating Instructions Manual page 12

Example 3
TV, DVD Recorder / VCR and Cable
Rear of the TV
Aerial input
terminal
AC 220-240 V
50 / 60 Hz Terrestrial
aerial
Mains lead
■
Connecting to the network environment (Network connections)
To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network
environment.
•
If you do not have any broadband network services, please consult your retailer for assistance.
•
Connect with LAN cable (Wired connection) or Wireless LAN Adaptor (Wireless connection).
•
Setup of the network connection will start after the tuning (when first using the TV)
Rear of the TV
Wired connection
Less
than
10 cm
Note
•
For more information of the network connections
Note
•
To watch 3D contents
•
Connect to the TV's AV1 for a DVD Recorder / VCR supporting Q-Link (p. 97).
•
For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI cable (p. 103).
•
Q-Link and VIERA Link connection
•
Please also read the manual of the equipment being connected.
•
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor. Otherwise,
distortion of image / sound may occur or operation of other equipment may be interfered.
12
Connecting DVD Recorder / VCR and Cable TV Box
RF adaptor
(supplied)
RF cable
Wireless connection
Wireless LAN Adaptor and Extension cable
"Optional accessories" (p. 6)
•
Connect to the USB 1, 2 or 3 port.
LAN cable
Less
than
10 cm
Internet
environment
(p. 32)
(p. 95, 96)
Fully wired HDMI
compliant cable
SCART adaptor
(supplied)
Fully wired
SCART cable
AV 1
RF OUT
DVD Recorder or VCR
RF IN
Ferrite core - Large size (supplied)
Installing the Ferrite core
Pull back the tabs Wind the cable
(in two places) twice
(p. 85)
Cable
HDMI
Recorder/AV
Cable TV Box
RF OUT RF IN
Fully wired
SCART cable
AV 2
RF cable
(p. 14, 15)
Internet
environment
Access point
Press the cable
through and close
RF cable