Panasonic Viera TX-P46GT30B Operating Instructions Manual page 10

TV
1
2
3
4
1 CI slot (p. 64)
SD Card slot
2
3 USB 3 port (p. 68, 104)
4 HDMI1 - 4 terminal
5 Function select
•
[Volume] / [Contrast] / [Brightness] / [Colour] /
[Sharpness] / [Tint] (NTSC signal) / [Bass] ∗ / [Treble] ∗ /
[Balance] / [Auto Setup] (p. 48, 49)
∗ [Music] or [Speech] mode in the Sound Menu
6 Channel Up / Down, Value change (when using the F
button), Switching the TV On (press either button for
about 1 second when in Standby mode)
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
Operation guide
Operation guide will help you to operate by
using the remote control.
Example : [Owner ID]
Owner ID
Please enter new PIN
PIN
0 9
EXIT
Operation guide
Auto power standby function
The TV will automatically go to Standby mode in the following conditions:
• no signal is received and no operation is performed for 30 minutes in Analogue TV mode
• [Off Timer] is active in the Timer Menu (p. 20)
• no operation is performed for the period selected in [Auto Standby] (p. 41)
•
This function does not affect the recording of Timer Programming, Direct TV Recording and One Touch Recording.
10
12
8 9
(p. 72)
(p. 103)
- Operation guide
* * * *
PIN entry
7 Changes the input mode
5
8 Mains power On / Off switch
•
Use to switch the mains power.
6 If you turned the TV Off during Standby mode by the
remote control last time, the TV will be in Standby
mode when you turn the TV On with Mains power On
7
/ Off switch.
9 Remote control signal receiver
•
Do not place any objects between the TV remote
control signal receiver and remote control.
10 C.A.T.S. (Contrast Automatic Tracking System)
sensor
•
Senses brightness to adjust picture quality when
10 11
[C.A.T.S.] in the Picture Menu is set to [On]
11 Power and Timer LED
•
Red : Standby
Green : On
Orange : Timer Programming On
Orange (flash) :
Recording of Timer Programming, Direct TV
Recording or One Touch Recording in progress
Red with orange flash :
Standby with Timer Programming On, Direct TV
Recording or One Touch Recording
•
The LED blinks when the TV receives a command
from the remote control.
12 Infrared transmitter for 3D Eyewear
•
Do not place any objects between the transmitter
and 3D Eyewear.
How to use remote control
MENU
Open the main menu
Move the cursor / select the menu item / select from a
range of options
Move the cursor / adjust levels / select from a range of
options
Access the menu / store settings after adjustments have
been made or options have been set
BACK/
RETURN Return to the
previous menu
(p. 38)
Exit the menu system
EXIT
and return to the normal
viewing screen