Care And Cleaning Of The Dryer; The Lint Filter; The Exhaust Duct; The Exhaust Hood - GE Profile DPSB620 Owner's Manual

Loadingand usingthe dryer.
Always follow the fabric manufacturer's care label when laundering.
Careand Cleaningof the Dryer
The Exterior:_._ipe or dust any, si}ills or washing
compounds with a dmni_ cloth. Dr_er control
panel and finishes mm be damaoed_ by, some
laundI? pretreatment soil and stain relnoxer
products. App1} these products away from the
(haer. The ed_ric ma) then be washed and dried
normall): Damage to )our dr_er caused bx these
products is not co_,ered by your warrant_.
The Liut filter: Clean the
lint filter befl)re each use.
Moisten your fingeis and
reach into the filter
opening. Run wmr fingeI_
across the filter. Hme
a qualified technician
vactltli// the lint from the
dryer once _1 ve_li'.
Stainless Steel'. To clean stainless
steel surtaces,
use a damp cloth with a mild, non-abrasive cleaner
suitable ti_r stainless steel surfaces. Remove the
cleaner residue, and then dry with a clean cloth.
The Exhaust Duct: Inspect and clean the exhaust
ducting at least once a year to prevent clogging.
A partially clogged exhaust can lengthen the
drying time.
Follow those steps:
_] Turn off electrical supply
by disconnecting
the plug from the wall s_cl_et.
[_ Disconnect the duct ti'om the dryer.
[3] Vactltlill the duct with the hose attachment
and reconnect the duct.
TheExhaust Hood: Check from the outside that tile
flaps _fftile hood move ti'eely when operating. Make
sure that there is no wildlife (birds, insects, etc.)
nesting inside the duct or hood.
/8