Tv/Vcr Section; C Set Up For Use; Selecting The Language; Clock Set Up (Auto / Manual) - Emerson EWC27T4 Owner's Manual

SELECTING THE LANGUAGE

1
Plug in the TV/VCR/DVD power cord
Plug the TV/VCR/DVD power cord into a
standard AC outlet.
NOTE:
•
If any digits appear in the corner of the
screen, press the POWER button without unplug-
ging the power cord.
Make sure ...
•
Press the SELECT button to select TV/VCR mode or
make sure TV/VCR lights on.
•
Press the POWER button to turn on the TV/VCR/DVD.
NOTE: This function effects only the language on
the screen menu and not the audio source.
2
Select "LANGUAGE"
Press the SETUP button on the
remote control.
Press the Arrow button K or L to
point to "LANGUAGE".
3
Select "ENGLISH", "ESPAÑOL" or "FRANÇAIS"
Select "ENGLISH", "ESPAÑOL"= Spanish or
"FRANÇAIS"= French using the ENTER button.
4
Exit the Language mode
Press the SETUP button on the remote control to
return to TV mode.
NOTE: If for some reason the menu is in Spanish or
French, press the SETUP button on the remote control,
press the Arrow button K or L to point to "IDIOMA
[ESPAÑOL]" or "LANGAGE [FRANÇAIS]", then
press the ENTER button, then press the SETUP button
on the remote control.
SET UP FOR USE
TV/VCR
The TV/VCR/DVD clock must be set correctly before
VCR timer recording is possible. It is suggested that
the clock be set manually when first setting up the
TV/VCR/DVD, then set to [ON] the auto clock set-
ting which will periodically correct the setting if nec-
essary.
NOTE: If you cannot receive a station with time
signals, auto clock setting cannot be performed. Use
manual setting only.
MANUAL CLOCK SETTING
Make sure ...
•
The TV/VCR/DVD is turned on.
In the example below, the clock is to be set to:
DATE
– M E N U –
TIMER PROGRAMMING
SETTING TIME
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
1
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
Press the SETUP button on the
remote control.
Press the Arrow button K or L to
point to "SETTING CLOCK".
Then press the ENTER button.
2
Press the Arrow button K or L to
point to "MANUAL CLOCK
SET".
Then press the ENTER button.
3
Press the Arrow button K or L
until your desired month appears.
(Example: May → 05)
Then press the Arrow button B.
(Or press the Arrow button { to
go back one step.)
4
Press the Arrow button K or L
until your desired day appears.
(Example: 6th → 06)
Then press the Arrow button B.
- 15 -
CLOCK SET UP
(AUTO / MANUAL)
May 6th, 2004
5:40PM
Select "SETTING CLOCK"
Select "MANUAL CLOCK SET"
Select the month
Select the day

TV/VCR SECTION

TV/VCR
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
B MANUAL CLOCK SET
D.S.T. [OFF]
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / – – – – – – – – –
HOUR MINUTE
– – : – – – –
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 – – – – – – –
HOUR MINUTE
– – : – – – –
EN
1C29