Memory; Saving Settings In The Memory; Starting The Memory Function; Changing The Basic Settings - Bosch HMT35M653B Instruction Manual

Memory

The memory allows you to store the setting for your favourite
meal and call it up at any time.
Two memory locations are available: "
The memory is useful if you prepare one meal particularly
frequently.

Saving settings in the memory

Press the % button.
1.
Your appliance is ready for use.
Press the button for the microwave power setting you require.
2.
The power and a suggested cooking time appear in the
display.
Set the cooking time using the rotary selector.
3.
Press and hold the g or
4.
4 seconds until a signal sounds.
The setting is saved and can be started at any time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.

Starting the memory function

You can start cooking at any time using the settings saved for
your meal.

Changing the basic settings

Your appliance has various basic settings which you can
change at any time.

Basic settings

In the table, you will find all the basic settings and options for
changing them.
Basic setting
Clock display
™‚
= on
‚
Signal duration
™ƒ
ƒ = medium = 2 minutes
Button tone
™„
= on
‚
Waiting time
™...
= medium = 5 seconds
ƒ
Prerequisite: your appliance is switched off.
Press and hold the 0 button for a few seconds.
1.
The first basic setting appears in the display.
You can change the basic setting by turning the rotary
2.
selector.

Care and cleaning

With careful care and cleaning your microwave oven will retain
its looks and remain good order. We will explain here how you
8
g " and " h ".
h button for approximately
Options
Clock display
= off
ƒ
‚ = short = 10 seconds
= long = 5 minutes
„
Button tone
= off
ƒ
‚ = short = 2 seconds
„ = long = 10 seconds
Press the % button.
1.
Your appliance is ready for use.
Press the g or h button.
2.
The stored settings are displayed.
Press the n button.
3.
The memory function starts. The
in the display.
Note: Once operation has started, you can no longer change
the memory location.
Note: The programmes which have been set remain stored
even if there is a power cut.
The cooking time has elapsed.
An audible signal sounds. The memory function has finished.
Use the % button to switch off the appliance or make new
settings. You can stop the audible signal by pressing the
button.
Pausing
Briefly press the button or open the appliance door.
n
Operation is suspended.
After closing the door, press the
continue.
Explanation
Displays the clock
Audible signal after the cooking time has
elapsed
Confirmation tone when a button is pressed
Waiting time between two separate steps,
after setting
Confirm by pressing the
3.
The next basic setting appears in the display. You can go
through all of the basic settings with the
changes with the rotary selector.
To finish, press and hold the
4.
All settings are applied.
You can change the settings at any time.
should care for and clean your appliance correctly.
r cooking time counts down
button. Operation will then
n
button.
0
button and make
0
button for a few seconds.
0
0