Table of Contents
Advertisement
6.
ASUS EZ-Backup Serial ATA connectors
(7-pin EZ_RAID1 [orange], EZ_RAID2 [orange])
These connectors are for the ASUS EZ-Backup feature. Connect Serial
ATA signal cables that support Serial ATA hard disk drives to build a RAID
0 or RAID 1 set easily. Refer to Chapter 5 for details on how to build an
EZ-Backup RAID set.
P5W EZ_RAID connectors
You may create a RAID 10 set through a cross-RAID configuration by installing
three hard disk drives on the ICH7R Serial ATA connectors, and one hard disk
drive on EZ_RAID1. See section "5.4.5 Cross-RAID configuration for details.
7.
Internal audio connector (4-pin CD)
This connector allows you to receive stereo audio input from a CD-ROM.
P5W Internal audio connector
ASUS P5W
®
EZ_RAID2
®
CD
EZ_RAID1
2-5
Advertisement
Table of Contents
