Table of Contents
Advertisement
Creating a RAID 10 set using the Intel
To create a RAID 10 set:
1.
Turn on the system.
2.
During POST, press <Ctrl+I> to display the utility main menu.
3.
From the utility main menu, select 1. Create RAID Volume, then press
<Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
[↑↓]-Change
4.
Enter a name for the RAID 10 set, then press <Enter>.
5.
When the RAID Level item is highlighted, press the up/down arrow key to
select RAID 10(RAID0+1), then press <Enter>.
6.
When the Stripe Size item is highlighted, press the up/down arrow key to
select the stripe size for the RAID 10 array, then press <Enter>. The available
stripe size values range from 4 KB to 128 KB. The default stripe size is 64
KB.
TIP: We recommend a lower stripe size for server systems, and a higher stripe
size for multimedia computer systems used mainly for audio and video editing.
5-2
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
[
DISK/VOLUME INFORMATION
cannot contain special characters.
[TAB]-Next
Matrix Storage Manager Option ROM Utility
®
CREATE ARRAY MENU
]
Volume10
RAID10(RAID0+1)
Select Disks
128KB
XXX.X GB
Create Volume
[ESC]-Previous Menu
]
[Enter]-Select
Chapter 5: Software support
Advertisement
Table of Contents
