Table of Contents
Advertisement
TO RECORD A SCRAMBLED/UNSCRAMBLED
CHANNEL
1. Set the TV/VCR channel selector to the output
channel of the Cable Converter Box or Satellite
Box. (Ex. CH3)
2. Select the channel to record from your Cable
Converter Box or Satellite Box.
EXTERNAL INPUT MODE
When using an external input signal (another VCR or
camcorder), connect the player's audio/video output
cables to the AUDIO IN/ VIDEO IN jacks of your
TV/VCR. Then press the CHANNEL K or L button
until "AUX" appears on the screen.
NOTE: "AUX" is found below the
lowest memorized channel.
(Example: CH2)
SELECTING THE LANGUAGE
1
Plug in the TV/VCR power cord
Plug the TV/VCR power cord into a
standard AC outlet.
NOTE:
•
If some digits appear in the corner of
the screen, press the POWER button
without unplugging the power cord.
•
If you want to play or record a video tape
BEFORE presetting the tuner, you must press the
MENU button on the remote control. To preset the
tuner again, see "CHANNEL SET UP" on page
13.
Make sure ...
•
Press the POWER button to turn on the TV/VCR.
NOTE: This function effects only the language on
the screen menu and not the audio source.
2
Select "LANGUAGE"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "LANGUAGE".
INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing
the cover on the remote unit in the direction of the
arrow.
2)Insert 2 "AA" penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3)Replace the cover.
AUX
SET UP FOR USE
3
Select "ENGLISH", "ESPAÑOL"= Spanish, or
"FRANÇAIS"= French using the F.FWD/B or
REW/s button.
4
Press the MENU button on the remote control to
return to TV mode.
NOTE: If for some reason the menu is in Spanish or
French, press the MENU button on the remote con-
trol, press the PLAY/K button to point to "IDIOMA
[ESPAÑOL]" or "LANGAGE [FRANÇAIS]", then
press the F.FWD/B button, then press the MENU
button on the remote control.
The TV/VCR clock must be set correctly before VCR
timer recording is possible. It is suggested that the
– M E N U –
clock be set manually when first setting up the
TIMER PROGRAMMING
PICTURE CONTROL
TV/VCR. Then, set to [ON] the auto clock setting
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
which will periodically correct the setting if necessary.
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION [OFF]
NOTE: If you cannot receive a station with time
ZERO RETURN
TIME SEARCH
signals, auto clock setting cannot be performed. Use
manual setting only.
- 10 -
Select "ENGLISH", "ESPAÑOL" or "FRANÇAIS"
Exit the Language mode
CLOCK SET UP
(AUTO / MANUAL)
EN
9I03
Advertisement
Table of Contents
