ASROCK H61M-VG3 User Manual page 33

STEP 3: Install Windows
After making a SATA / SATA2 driver diskette, you can start to install Windows
/ XP 64-bit on your system. At the beginning of Windows
a third-party AHCI driver. When prompted, insert the SATA / SATA2 driver diskette
®
containing the Intel
sented. Select the driver to install according to the mode you choose and the OS
you install.
Using SATA / SATA2 HDDs without NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode Selection" to [IDE].
STEP 2: Install Windows
2.14.2 Installing Windows
TM
Vista 64-bit Without RAID Functions
If you want to install Windows
on your SATA / SATA2 HDDs without RAID functions, please follow below steps.
Using SATA / SATA2 HDDs with NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode Selection" to [AHCI].
STEP 2: Install Windows
your system.
Using SATA / SATAII HDDs without NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode Selection" to [IDE].
STEP 2: Install Windows
your system.
®
XP / XP 64-bit OS on your system.
AHCI driver. After reading the floppy disk, the driver will be pre-
Advanced screen
®
XP / XP 64-bit OS on your system.
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
Advanced screen
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
Advanced screen
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
setup, press F6 to install
Storage Configuration.
Storage Configuration.
TM
Storage Configuration.
TM
33
®
TM
/
TM TM
/ Vista 64-bit OS
TM
/ Vista 64-bit OS on
TM
/ Vista 64-bit OS on
XP