Hints For Automatic Timer Recording; Auto Return; Wake Up Timer - Emerson EC313D Owner's Manual

TO CHECK THE BEGIN/END TIME
1)Press the POWER button so that the REC indicator
goes off.
2)Press the MENU button on the remote control.
3)Confirm "TIMER PROGRAMMING" is pointed.
4)Press the F.FWD/B button. The details of pro-
grams appear on the TV screen.
5)Press the MENU button on the remote control to
return to TV mode.
HINTS FOR AUTOMATIC
TIMER RECORDING
•
Make sure the channel you want to record is prop-
erly set in advance.
•
It is not necessary to press the RECORD button for
timer recording.
•
Recording begins automatically at the Start time.
•
If you are recording using a Timer mode, you may
not operate the unit manually.
•
The erase-prevention tab on the cassette must be in
place (or you must put tape over the hole).
•
If the erase-prevention tab is removed, the cassette
will be ejected when the POWER button is pressed
to off.
•
If the tape runs out before the end time, the
TV/VCR will switch to the Stop mode immediate-
ly, and the tape will be ejected.

AUTO RETURN

With this feature, after timer recording is finished,
the beginning of the recorded program(s) can be
searched for automatically.
1
Select "USER'S SET UP"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "USER'S SET UP".
Then, press the F.FWD/B button.
2
Set "AUTO RETURN" to [ON]
Press the PLAY/K or STOP/L but-
ton to point to "AUTO RETURN".
Press the F.FWD/B or REW/s
button until [ON] appears. Then,
press the MENU button on the
remote control to return to TV mode.
3
Auto Return will begin
When all the timer recordings are completed, the
TV/VCR will rewind to the beginning of the record-
ed program(s).
NOTE:
•
If you press the POWER button while tape is
rewinding, the Auto Return will stop.
4
Press the PLAY button.
TO CANCEL THE AUTO RETURN
MODE
Repeat steps [1] and [2], select [OFF] using the
F.FWD/B or REW/s button. Then, press the
MENU button on the remote control to return to TV
mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
The Wake Up Timer function turns on the TV/VCR
without using the POWER button after a desired
period of time.
NOTES:
•
Use the remote control for this procedure.
•
Clock must be set to the correct time before setting
the timer.
•
If you want to select [TAPE], you must insert a
cassette tape in the TV/VCR. The tape will start
playback automatically on your desired time.
1
Press the WAKE-UP/SLEEP button
– M E N U –
TIMER PROGRAMMING
on the remote control once, and
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP confirm "ON/OFF" is pointed.
B USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
Press the F.FWD/B or REW/s
CAPTION [OFF]
ZERO RETURN
button until [ON] appears.
TIME SEARCH
2
Press the PLAY/K or STOP/L but-
– USER'S SET UP –
ton until to point to "TV/TAPE".
Press the F.FWD/B or REW/s
RENTAL [OFF]
REPEAT PLAY [OFF]
B AUTO RETURN [ON]
button, and select [TV] or [TAPE].
- 28 -
Watch the recorded program

WAKE UP TIMER

Select "WAKE UP TIMER"
Select "TV" or "TAPE"
WAKE UP B ON/OFF [ON]
TIMER TV/TAPE [TV]
TIME [12:00AM]
WAKE UP ON/OFF [ON]
TIMER B TV/TAPE [TV]
TIME [12:00AM]
EN
0B19