Ai Tweaker Menu; Ai Overclock Tuner - Asus P5Q SE Plus - Motherboard - ATX User Manual

2.4

Ai Tweaker menu

The Ai Tweaker menu items allow you to change the settings for system
performance.
Main Ai Tweaker
Configure System Performance Settings

Ai Overclock Tuner

FSB Strap to North Bridge
DRAM Frequency
DRAM Timing Control
1st Information: 5-5-5-15-3-36-5-3
2nd Information: 8-3-5-4-6-4-6
3rd Information: 13-5-1-5-5
DRAM Static Read Control
DRAM Read Training
MEM. OC Charger
Ai Clock Twister
Ai Transaction Booster
C/P: A1 A2 A3 A4
LUL: 09 09 09 09
********* Please key in numbers directly!**********
CPU Voltage
FSB Termination voltage
Memory Voltage
North Bridge Voltage
South Bridge Voltage
**************************************************
Load-Line Calibration
CPU GTL REference
CPU Spread Sepctrum
PCIE Spread Sprectrum
CPU Clock Skew
NB Clock Skew
CPU Margin Enhancement
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
2.4.1 Ai Overclock Tuner [Auto]
Allows selection of CPU overclocking options to achieve desired CPU internal
frequency. Select either one of the preset overclocking configuration options:
Manual
Auto
The following two items appear only when you set the Ai Overclock Tuner item
to [Manual].
FSB Frequency [XXX]
Displays the frequency sent by the clock generator to the system bus and PCI bus.
The value of this item is auto-detected by the BIOS. Use the <+> and <-> keys to
adjust the FSB frequency. You can also type the desired CPU frequency using the
numeric keypad. The values range from 200 to 800. Refer to the table below for
the correct Front Side Bus and CPU External Frequency settings.
ASUS P5Q SE Plus
BIOS SETUP UTILITY
Advanced Power
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Optimized]
Allows you to individually set overclocking parameters.
Loads the optimal settings for the system.
Boot Tools Exit
Options
MANUAL
Auto
Select Screen
Select Item
+-
Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
2-17