Hardware Management Subsystem - Intel D845EPT2 Specification

Intel Desktop Board D845EBG2/D845EPT2 Technical Product Specification
✏
NOTE
The brand and type of audio codec used on the CNR card must match that of the Desktop Boards'
codec (Analog Devices AD1981A).
✏
NOTE
Check with your CNR vendor to ensure that the CNR card has been tested with ICH4-based
systems.
✏
NOTE
There is no USB interface routed to the CNR connector.
For information about
Obtaining the CNR specification

1.13 Hardware Management Subsystem

The hardware management features enable the Desktop Boards to be compatible with the Wired
for Management (WfM) specification. The Desktop Board has several hardware management
features, including the following:
•
Fan monitoring and control (through the I/O controller or the hardware monitoring and fan
control ASIC)
•
Thermal and voltage monitoring
•
Chassis intrusion detection
For information about
The WfM specification
34
Refer to
Section 1.5, page 18
Refer to
Section 1.5, page 18