Dram Configuration - Gigabyte GA-890FXA-UD7 User Manual

DRAM Configuration

CPU Host Clock Control
x CPU Frequency(MHz)
Set Memory Clock
x Memory Clock
DCTs Mode
DDR3 Timing Items
x CAS# latency
x RAS to CAS R/W Delay
x Row Precharge Time
x Minimum RAS Active Time
x 1T/2T Command Timing
x TwTr Command Delay
x Trfc0 for DIMM1
x Trfc2 for DIMM2
x Trfc1 for DIMM3
x Trfc3 for DIMM4
x Write Recovery Time
x Precharge Time
x Row Cycle Time
higf : Move Enter: Select
F5: Previous Values
x RAS to RAS Delay
** DCTs Drive Strength **
ProcOdt(ohms)
DQS Drive Strength
Data Drive Strength
MEMCLK Drive Strength
Addr/Cmd Drive Strength
CS/ODT Drive Strength
CKE Drive Strength
** DCTs Addr/Cmd Timing **
Addr/Cmd setup time
Addr/Cmd fine delay
CS/ODT setup time
CS/ODT fine delay
CKE setup time
CKE fine delay
Bank Interleaving
Channel Interleave
higf : Move Enter: Select
F5: Previous Values
DQS Training Control
CKE Power Down Mode
Memclock tri-stating
higf : Move Enter: Select
F5: Previous Values
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
DRAM Configuration
[Auto]
200
[Auto]
x6.66
[Unganged]
[Auto]
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
DRAM Configuration
Auto
DCT0
[Auto]
[Auto] 1.0x
[Auto] 1.0x
[Auto] 1.25x
[Auto] 1.5x
[Auto] 1.5x
[Auto] 1.5x
DCT0
[Auto] 1T
[Auto] 22/64
[Auto] 1/2T
[Auto] 0/64
[Auto] 1/2T
[Auto] 0/64
[Enabled]
[Enabled]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
DRAM Configuration
[Skip DQS]
[Disabled]
[Disabled]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
1333Mhz
SPD Auto
9T 9T
9T 9T
9T 9T
24T 24T
-- --
5T 5T
110ns 110ns
-- --
-- --
-- --
10T 10T
5T 5T
33T 33T
F10: Save
4T 4T
DCT1
60 [Auto] 60
[Auto] 1.0x
[Auto] 1.0x
[Auto] 1.25x
[Auto] 1.5x
[Auto] 1.5x
[Auto] 1.5x
DCT1
[Auto] 1/2T
[Auto] 0/64
[Auto] 1/2T
[Auto] 0/64
[Auto] 1/2T
[Auto] 0/64
F10: Save
F10: Save
- 43 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup