Dram Configuration; Memory Clock - Gigabyte GA-M750SLI-DS4 User Manual

Memory Controller Freq.
Allows you to alter the memory controller frequency for the installed CPU. The adjustable range is
dependent on the CPU being used. (Default: Auto)

DRAM Configuration

SLI-Ready Memory
Set Memory Clock
x Memory Clock
(Note)
DCTs Mode
DDRII Timing Items
x CAS# latency
x RAS to CAS R/W Delay
x Row Precharge Time
x Minimum RAS Active Time
x 1T/2T Command Timing
x TwTr Command Delay
x Trfc0 for DIMM1
x Trfc2 for DIMM2
x Trfc1 for DIMM3
x Trfc3 for DIMM4
x Write Recovery Time
x Precharge Time
x Row Cycle Time
x RAS to RAS Delay
: Move Enter: Select
F5: Previous Values
SLI-Ready Memory
Allows you to enable or disable the SLI-Ready (EPP) memory function. (Default: Disabled)
Set Memory Clock
Determines whether to manually set the memory clock. Auto lets BIOS automatically set the
memory clock as required. Manual allows the memory clock control item below to be configurable.
(Default: Auto)

Memory Clock

This option is configurable only when Set Memory Clock is set to Manual.
When you use an AM2 CPU:
DDR 400
DDR 533
DDR 667
DDR 800
When you use an AM2+ CPU:
x2.00
x2.66
x3.33
x4.00
x5.33
(Note) This item appears only if you install a CPU that supports this feature.
GA-M750SLI-D4 Motherboard
(Note)
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
DRAM Configuration
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Sets Memory Clock to DDR 400.
Sets Memory Clock to DDR 533.
Sets Memory Clock to DDR 667.
Sets Memory Clock to DDR 800.
Sets Memory Clock to x2.00.
Sets Memory Clock to x2.66.
Sets Memory Clock to x3.33.
Sets Memory Clock to x4.00.
Sets Memory Clock to x5.33.
[Disabled] Not Detected
[Auto]
x4.00 800Mhz
[Unganged]
[Auto] SPD Auto
Auto 6T 6T
Auto 6T 6T
Auto 6T 6T
Auto 18T 18T
Auto - - - -
Auto 3T 3T
Auto 105ns 105ns
Auto - - - -
Auto - - - -
Auto - - - -
Auto 6T 6T
Auto 4T 4T
Auto 25T 25T
Auto 3T 3T
F10: Save
- 40 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults