ASROCK E350M1 User Manual page 31

RAS to RAS Delay (tRRD)
Use this item to change RAS to RAS Delay (tRRD) Auto/Manual setting.
The default is [Auto].
Write to Read Delay (tWTR)
Use this item to change Write to Read Delay (tWTR) Auto/Manual setting.
The default is [Auto].
Read to Precharge (tRTP)
Use this item to change Read to Precharge (tRTP) Auto/Manual setting.
The default is [Auto].
Four Activate Window (tFAW)
Use this item to change Four Activate Window (tFAW) Auto/Manual
setting. The default is [Auto].
Voltage Control
DRAM Voltage
Use this to select DRAM Voltage. Confi guration options: [Auto], [1.300V]
to [1.965V]. The default value is [Auto].
+1V Voltage
Use this to select +1V Voltage. Confi guration options: [Auto], [1.07V] to
[1.16V]. The default value is [Auto].
FCH Voltage
Use this to select FCH Voltage. Confi guration options: [Auto], [1.10V] to
[1.40V]. The default value is [Auto].
+1.8V Voltage
Use this to select +1.8V Voltage. Confi guration options: [Auto], [1.85V] to
[2.10V]. The default value is [Auto].
User Default
In this option, you are allowed to load and save three user defaults
according to your own requirements.
31