Table of Contents
Advertisement
B
DISPLAY SETTING
You can change certain aspects of the DVD display
screens and on-screen messages on the TV screen.
Follow steps
1 to 2 in the "CUSTOM MENU" sec-
tion on page 27.
3
K
/
L
Press [
] to select the below items then
hit [ENTER].
TV MODE:
QUICK
¡
Press [K / L] for an item
selection, then hit [ENTER].
¡
Select "4:3 LETTER BOX"
for black bars to appear on top and bottom of the
screen.
¡
Select "4:3 PAN & SCAN" for a full height picture
with both sides trimmed.
¡
The default setting is "4:3 LETTER BOX".
STILL MODE:
¡
Press [K / L] for an item
selection, then hit [ENTER].
¡
Select "AUTO" normally.
¡
If you select "FIELD", the picture in the still mode
will be stabilized.
¡
If you select "FRAME", the picture in the still
mode will be highly defined.
ANGLE ICON:
¡
Hit [ENTER] repeatedly to turn Angle icon "ON" or
"OFF".
¡
The default setting is "ON".
AUTO POWER OFF:
¡
Hit [ENTER] repeatedly to turn Auto Power off
"ON" or "OFF".
¡
The default setting is "ON" and the screen saver pro-
gram starts when there is no input from the unit for
5 minutes in the stop mode. After the screen saver
program is activated for 15 minutes, the power is
automatically turned off.
4
Hit [SETUP] to exit the menu.
TV SETUP MENU IN DVD MODE
•
Language setting for on-screen menus is only available in TV SETUP menu. You can access it by hitting
[SETUP] in DVD mode (Refer to "SELECTING THE LANGUAGE" on page 13).
•
"CHANNEL SET UP" menu is not operative in DVD mode although it is displayed on the screen.
Press [SELECT] to move to TV mode first, then follow steps in "CHANNEL SET UP" on page 13.
C
Choose the appropriate Audio settings for your equip-
ment as it only affects during the playback of DVD
discs.
Follow steps
tion on page 27.
SETUP
DISPLAY
DRC (Dynamic Range Control):
TV MODE
4:3 LETTERBOX
STILL MODE
AUTO
¡
ANGLE ICON
ON
AUTO POWER OFF ON
¡
DOWN SAMPLING:
¡
¡
SETUP
DISPLAY
When playing disc with copyright Protection
TV MODE
4:3 LETTERBOX
STILL MODE
AUTO
¡
ANGLE ICON
ON
AUTO POWER OFF ON
DOLBY DIGITAL:
Set to "ON" when the unit is
connected to a Dolby Digital
Decoder.
¡
¡
– 28 –
AUDIO SETTINGS
1 to 2 in the "CUSTOM MENU" sec-
3
K
/
L
Press [
] to select the below items then
hit [ENTER].
To compress the range of soft
to loud sound.
The default setting is "ON".
ON : Output in 48 kHz.
(default)
OFF : Output the original
sound.
If you select "OFF", copyright protection will be
activated and sound will be down sampled at 48kHz.
QUICK
ON: Output a Dolby Digital signal (default)
OFF: Convert the Dolby Digital to PCM
(2 channel stereo)
4
Hit [SETUP] to exit the menu.
SETUP
AUDIO
DRC
ON
DOWN SAMPLING
ON
DOLBY DIGITAL
ON
SETUP
AUDIO
DRC
ON
DOWN SAMPLING
ON
DOLBY DIGITAL
ON
SETUP
AUDIO
DRC
ON
DOWN SAMPLING
ON
DOLBY DIGITAL
ON
EN
Advertisement
Table of Contents
