Setting The Bios Configuration Jumper; Location Of The Bios Configuration Jumper Block - Intel BOXDP55KG Product Manual

Installing and Replacing Desktop Board Components

Setting the BIOS Configuration Jumper

NOTE
Always turn off the power and unplug the power cord from the computer before
moving the jumper. Moving the jumper with the power on may result in unreliable
computer operation.
Figure 32 shows the location of the Desktop Board's BIOS configuration jumper block.
Figure 32. Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables board configuration to be done in the BIOS
Setup program. Table 13 shows the jumper settings for the BIOS Setup program
modes.
59