Storage Configuration - ASROCK 970 Pro2 User Manual

3.4.4 Storage Configuration

Advanced
Storage Configuration
Onboard SATA Controller
SATA Operation Mode
SATA IDE Combined Mode
IDE1 Master
IDE1 Slave
SATAII_1
SATAII_2
SATAII_3
SATAII_4
SATAII_5
SATAII_6
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Onboard SATA Controller
Use this item to enable or disable the "Onboard SATA Controller" feature.
SATA Operation Mode
Use this item to adjust Onboard SATA Operation Mode. The default value
of this option is [AHCI]. Configuration options: [AHCI], [IDE] and [RAID].
If you set this item to RAID mode, it is suggested to install SATA ODD
driver on SATAII_5 (PORT 4) and SATAII_6 (PORT 5) ports.
SATA IDE Combined Mode
This item is for SATAII_5 (PORT 4) and SATAII_6 (PORT 5) ports. Use this
item to enable or disable SATA IDE combined mode. The default value is
[Enabled].
If you want to build RAID on SATAII_5 (PORT 4) and SATAII_6 (PORT 5
ports, please disable this item.
BIOS SETUP UTILITY
[Enabled]
[AHCI]
[Enabled]
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
43
Configure onboard
serial ATA
controller.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit