With Raid Functions; Installing Windows ® 7 / 7 64-Bit / Vista; Tm Tm - ASROCK 970 Pro2 User Manual

STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 4: Install Windows
After step 1, 2, 3, you can start to install Windows
system. At the beginning of Windows
driver. When prompted, insert the SSATA / SATA2 driver diskette containing the
AMD RAID driver. After reading the floppy disk, the driver will be presented. Select
the driver to install according to the OS you install.
2.11.2 Installing Windows

With RAID Functions

If you want to install Windows
composed of 2 or more SATA / SATA2 HDDs with RAID functions, please follow
below steps.
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows
system.
®
XP / XP 64-bit OS on your system.
®
setup, press F6 to install a third-party RAID
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
Advanced screen
® TM
7 / 7 64-bit / Vista
29
®
XP / XP 64-bit OS on your
TM
/ Vista
TM TM
/ Vista 64-bit on a RAID disk
Storage Configuration.
TM
/ Vista 64-bit OS on your
TM
64-bit