Surround Display Feature - ASROCK 970 Extreme3 Quick Installation Manual

2.6 Surround Display Feature

This motherboard supports Surround Display upgrade. With the external add-on PCI
Express VGA cards, you can easily enjoy the benefi ts of Surround Display feature.
For the detailed instruction, please refer to the document at the following path in the
Support CD:
..\ Surround Display Information
2.7 ASRock Smart Remote Installation Guide
ASRock Smart Remote is only used for ASRock motherboard with CIR header.
Please refer to below procedures for the quick installation and usage of ASRock
Smart Remote.
Step1. Find the CIR header located next
to the USB 2.0 header on ASRock
motherboard.
Step2. Connect the front USB cable to the
USB 2.0 header (as below, pin 1-5)
and the CIR header. Please make
sure the wire assignments and the
pin assignments are matched
correctly.
Step3. Install Multi-Angle CIR Receiver to
the front USB port. If Multi-Angle
CIR Receiver cannot successfully
receive the infrared signals from
MCE Remote Controller, please try
to install it to the other front USB
port.
20
USB_PWR
ATX+5VSB
3 CIR sensors in different angles
ASRock 970 Extreme3 Motherboard
USB 2.0 header (9-pin, black)
CIR header (4-pin, gray)
P-
P+
GND
DUMMY
1 3
2 4 5
GND
IRTX
IRRX