Windows Xp Installation - ASROCK 939S56-M Installation And Configuration Manual

3 . Installation of Windows 2000 / Windows XP
If you want to install Windows 2000 or Windows XP on your SATA HDDs,
you will need to make an SATA driver diskette (see page 3 for details)
before you start the OS installation. If you prefer not to use RAID function,
you may start to install Windows 2000 / Windows XP once you have the
SATA driver diskette ready. If you want to use RAID function, you need to
set the RAID configuration (see page 4 to page 22) before you install Win-
dows 2000 / Windows XP.
For the installation of the SATA drivers while installing Windows 2000 or
Windows XP, please follow the instruction below.
1. Insert Windows 2000 or Windows XP CD into the optical drive.
2. Remove the floppy diskette, and reboot the system. When you start the
installation, press <F6> once you see the message at the bottom of the
screen, "Press F6 if you need to install a third party SCSI or RAID driver".
Press F6 if you need to install a third party SCSI or RAID driver . . . Press F6 if you need to install a third party SCSI or RAID driver . . .