Guide To Sata Hard Disks Installation; Serial Ata (Sata) Hard Disks Installation - ASROCK 939S56-M Installation And Configuration Manual

1 . Guide to SATA Hard Disks Installation

1.1 Serial ATA (SATA) Hard Disks Installation

This motherboard adopts SiS 965L south bridge chipset that supports Serial
ATA (SATA) hard disks. You may install SATA hard disks in this motherboard
for internal storage devices. This section will guide you to install the SATA
hard disks.
STEP 1: Install the SATA hard disks into the drive bays of your chassis.
STEP 2: Connect one end of the SATA data cable to the motherboard's
primary SATA connector (SATA1).
STEP 3: Connect the other end of the SATA data cable to the primary SATA
hard disk.
STEP 4: Connect the SATA power cable to the SATA hard disk. If you just
want to install only one SATA HDD, the installation process is
complete at this step. If you want to install two SATA HDDs or you
want to use RAID function, please continue to do the following
steps.
STEP 5: Connect one end of the second SATA data cable to the
motherboard's secondary SATA connector (SATA2).
STEP 6: Connect the other end of the SATA data cable to the secondary
SATA hard disk.
STEP 7: Connect the SATA power cable to the SATA hard disk.