Use Of Detergent And Rinse Aid - Electrolux ESL 43020 User Manual

8 electrolux

USE OF DETERGENT AND RINSE AID

1
2
30
20
8
Use of detergent
To help the environment, do not use
more than the correct quantity of deter-
gent.
Obey the instructions on packaging of
the detergent .
To fill the detergent dispenser:
1. Press the release button
8
lid .
2. Put the detergent in the detergent dis-
1
penser .
3. If the washing programme has a pre-
wash phase, put a small quantity of de-
tergent on the inner side of the appli-
ance door.
4. If you use detergent tablets, put the tab-
let in the detergent dispenser
5. Close the lid until it locks into position.
Use long washing programmes when
you use detergent tablets. Detergent
tablets do not fully dissolve with short
washing programmes and can de-
crease the washing results.
Use of rinse aid
Rinse aid makes it possible to dry the
dishes without streaks and stains.
Rinse aid is automatically added during
the last rinsing phase.
To fill the rinse aid dispenser:
3 5
4
A
-
+
6
7
2
to open the
1
.
1. Press the release button
6
lid .
2. Fill the rinse aid dispenser
aid. The mark 'max.' shows the maxi-
mum level.
3. Remove the spilled rinse aid with an ab-
sorbent cloth to prevent foam during the
washing programme.
4. Close the lid until it locks into position.
Fill the rinse aid dispenser when the
5
lens is transparent.
Adjust the rinse aid dosage
Factory set: position 3.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 4
(highest dosage).
Turn the rinse aid selector
decrease the dosage.
Using combi detergent tablets
These tablets contain agents as detergent,
rinse aid and dishwasher salt. Some types
of tablets can contain other agents.
When you use tablets, that contain salt and
rinse aid, do not fill the salt container and
rinse aid dispenser.
Be sure that these tablets are applicable for
the water hardness in your area (refer to the
instructions on the packaging of the prod-
ucts).
1. Adjust the water hardness to the lowest
level. Refer to 'Setting the water soften-
er'.
2. Set the rinse aid dosage to the lowest
position. Refer to 'Use of detergent and
rinse aid'.
Using again separately detergent, salt
and rinse aid
1. Fill the salt container and the rinse aid
dispenser.
2. Adjust the water hardness to the highest
level.
3. Start a washing programme without
dishes.
4. When the washing programme is com-
pleted, adjust the water softener to the
water hardness in your area.
5. Adjust the quantity of rinse aid.
7
to open the
3
with rinse
4
to increase or