Stereo Headphone Jack - Emerson Research iE600 Owner's Manual

4.) You should hear the sound from your external source through the speakers of
this system. Adjust the Volume, EQ or Bass/Treble, and Surround controls
of this system as desired.
NOTE: If you connected the Line Out jack of your external source then you
only need to adjust the volume control of this system. If you connected the
headphone jack of your external source then you may need to adjust both
the volume control of your external source and the volume control of this
system to find the most desirable volume setting.
5.) When you are finished listening press the
turn the power ' Off' . Don't forget to switch off the power to your external source
as well. NOTE: It is not necessary to disconnect your external source from
the Aux In jack of this system.

Stereo Headphone Jack

This system includes a 3.5mm mini stereo headphone (Phones) jack on the front
panel so that you can listen privately without disturbing others. When the headphone
(not included) is connected to the Phones jack of this system the internal speakers
are automatically shut off.
IMPORTANT! Before you put on your headphones please reduce the volume
control of this system to a low level. Then put your headphones on and gradually
increase the volume to a comfortable listening level. Remember that CDs and
digital music files can contain both very soft and very loud passages. You
should adjust the volume control to a comfortable level while listening to a
louder passage so that you will not experience any discomfort caused by any
sudden increase in volume level.
The headphones must be disconnected from the Phones jack in order to listen to
the internal speakers again.
iE600_050407.p65
40
40
Power button of this system to
4/5/2007, 11:50