Chapter
4
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
Defining Authenticated Host
1. Click Security Suite > 802.1X > Authenticated Host. The 802.1X Port Authentication Page opens:
The 802.1X Authenticated Host Page contains the following fields:
•
Unit Number — Displays the stacking member for which the Authenticated Hosts parameters are
displayed.
•
User Name — Lists the supplicants that were authenticated, and are permitted on each port.
•
Port — Displays the port number.
•
Session time — Displays the amount of time (in seconds) the supplicant was logged on the port.
•
Authentication Method — Displays the method by which the last session was authenticated. The
possible field values are:
–
Remote — 802.1x authentication is not used on this port (port is forced-authorized).
–
None — The supplicant was not authenticated.
–
RADIUS — The supplicant was authenticated by a RADIUS server.
•
MAC Address — Displays the supplicant MAC address.
2. Define the relevant fields.
3. Click Apply. The authenticated host settings are defined, and the device is updated.
74
802.1X Authenticated Host Page
Chapter 4: