Define Snmp Groups - Linksys SFE2000P - Managed Ethernet Switch Reference Manual

Each byte in hexadecimal character strings is two hexadecimal digits. Each byte can be separated by
a period or a colon.
• Privacy Key — Defines the Privacy Key (LSB). If only authentication is required, 20 bytes are
defined. If both privacy and authentication are required, 36 bytes are defined. Each byte in
hexadecimal character strings is two hexadecimal digits. Each byte can be separated by a period or
colon.

Define SNMP Groups

The SNMP Groups Profile Page provides information for creating SNMP groups and assigning SNMP
access control privileges to SNMP groups. Groups allow network managers to assign access rights to
specific device features, or features aspects.
1. Click System > SNMP > Security > Groups. The SNMP Groups Profile Page opens:
The SNMP Groups Profile Page contains the following fields:
• Group Name — Displays the user-defined group to which access control rules are applied. The field
range is up to 30 characters.
• Security Model — Defines the SNMP version attached to the group. The possible field values are:
– SNMPv1 — SNMPv1 is defined for the group.
– SNMPv2 — SNMPv2 is defined for the group.
Chapter 11:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
SNMP Groups Profile Page
Chapter
11
183