Figure 6-11: Dmz Host; Figure 6-12: Mac Clone - Linksys RVS4000 User Manual

4-Port Gigabit Security Router with VPN
IPv6
IPv6 Address. If your network has implemented IPv6, enter the proper IPv6 address in this field.
Prefix Length. Enter the appropriate IPv6 prefix length.
Router Advertisement. Enabling this option allows IPv6 hosts to configure their IP addresses automatically
using the IPv6 prefix broadcast by the router.
Primary DNS. Enter the Primary IPv6 DNS server address.
Secondary DNS. Enter the Secondary IPv6 DNS server address.
DMZ
The DMZ screen allows one local PC to be exposed to the Internet for use of a special-purpose service such as
Internet gaming and videoconferencing. Whereas Port Range Forwarding can only forward a maximum of 10
ranges of ports, DMZ hosting forwards all the ports for one PC at the same time.
DMZ Hosting. This feature allows one local PC to be exposed to the Internet for use of a special-purpose service
such as Internet gaming and videoconferencing. To use this feature, select Enabled. To disable the DMZ feature,
select Disabled.
DMZ Host IP Address. To expose one PC, enter the computer's IP address.
Click the Save Settings button to save the network settings or click the Cancel Changes button to undo your
changes.
MAC Address Clone
Some ISPs require that you register a MAC address. This feature "clones" your network adapter's MAC address
onto the Router, and prevents you from having to call your ISP to change the registered MAC address to the
Router's MAC address. The Router's MAC address is a 12-digit code assigned to a unique piece of hardware for
identification.
Mac Address Clone. Enabled or Disabled.
Mac Address. Enter the MAC Address registered with your ISP in this field.
Clone My PC's MAC button. When Mac Address clone is enabled, click this to copy the MAC address of the
network adapter in the computer that you are using to connect to the Web interface.
Chapter 6: Setting Up and Configuring the Router
Setup Tab

Figure 6-11: DMZ Host

Figure 6-12: Mac Clone

22