Setting The Time Of Day - Emerson CKD9906 Owner's Manual

OPERATING INSTRUCTIONS

Setting The Time Of Day

• Connect the power cord to your AC outlet. Make sure to use an outlet that is
always ' live' . Do not use an outlet that is controlled by a wall switch.
• When the unit is plugged in for the first time the
display will show flashing "12:00" (AM).
1.) While the display is flashing, press the
to observe the PM indicator to set the hour correctly. If the PM indicator is ' On'
the hour displayed is PM.
2.) Press MIN. button to set the minute correctly. .
3.) Press the TIME button once. The time is set.
The display remains ' On' .
Note: You may proceed to re-set the time again by pressing the TIME button
once during Power-off or CD, FM, AM, Buzzer modes.
Important Notes !!
If you press and hold the TIME button any time, the clock will change to
European 24-Hour format, and vice versa.
PM
ALARM 1
CKD9906_071905.p65
HR. button to set the hour. Be sure
ALARM 1
ALARM 2
9
9
PM
ALARM 1
PM
ALARM 1
PM
ALARM 2
19/7/2005, 14:26
ALARM 2
ALARM 2