Adjust the image.
-1. Loosen the securing screws.
(at the eight locations indicated by the arrows in the figure below)
-2. Rough adjustment of image size.
1. Loosen the screw on the side of the arm.
2. Slide the arm forward and backward to
adjust image size.
The scale on the supplied template sheet
(J) simplifies adjustment. See page 10 for
information on how to use the template
sheet.
3. After completing adjustments, retighten
the screw.
Tightening torque: 0.98 N•m (10 kgf•cm)
* Use the supplied template sheet to simplify adjustment.
(See page 10.)
Note:
Do not loosen the screw on
the right and the two screws
on the opposite side.
B
15
A