Adjusting The Position; Correcting The Keystone Distortions - Dukane 8107HWI User Manual

Operating

Adjusting the position

Press the POSITION button on the remote control while no menu
1.
is on screen, to display the D-SHIFT (
Use the ▲, ▼, ◄ and ► buttons to adjust the picture position.
2.
Press the POSITION button again to finish this operation.
● This is a function to shift the position of the shrunken picture by the D-ZOOM (
function.
● When an OSD (On Screen Display) menu is displayed, this operation moves the
position of the OSD menu, but the picture position is not (
● The D-SHIFT adjustment values are not valid when the D-ZOOM is set to 320 (full
screen).

Correcting the keystone distortions

Press KEYSTONE button on the remote
1.
control. A dialog will appear on the screen
to aid you in correcting the distortion.
Use the ▲/▼ cursor buttons to select MANUAL or PERFECT
2.
FIT operation, and press the ► button to perform the following.
(1) MANUAL displays a dialog for keystone correction.
Use the ▲/▼ buttons to select
KEYSTONE, then use the ◄/► buttons for
adjustment.
(2) PERFECT FIT displays a dialog for adjusting the shape
of the projected image in each of the corners and sides.
To close the dialog and complete this operation, press
KEYSTONE button again. Even if you do not do anything, the
dialog will automatically disappear after a few seconds.
● The adjustable range of this function will vary among inputs. For some input,
this function may not work well.
● This function will be unavailable when Transition Detector is on (
26
44) dialog on screen.
KEYSTONE /
POSITION
ENTER
ESC
POSITION button
30).
KEYSTONE button
MY SOURCE/
COMPUTER
VIDEO DOC.CAMERA
ASPECT AUTO SEARCH
FREEZE PAGE
MAGNIFY
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON
1 2
76).
MENU
RESET
44)
BLANK
VOLUME
MUTE