Safety Warnings Specific For Sanding Operations - Dremel Saw-Max SM20 Operating/Safety Instructions Manual

Wheels must be
recommended applications. For example:
do not grind with the side of cut-off wheel.
Always use undamaged wheel flanges that
are of correct size and shape for your
selected wheel.
Do not use worn down wheels from larger
power tools.
Additional Safety Warnings Specific for
Abrasive Cutting-Off Operations:
Do not "jam" the cut-off wheel or apply
excessive pressure. Do not attempt to make
an excessive depth of cut.
Do not position your body in line with and
behind the rotating wheel.
When wheel is binding or when interrupting
a cut for any reason, switch off the power
tool and hold the power tool motionless
until the wheel comes to a complete stop.
Never attempt to remove the cut-off wheel
from the cut while the wheel is in motion
used only for otherwise kickback may occur.
Do not restart the cutting operation in the
workpiece. Let the wheel reach full speed
and carefully reenter the cut.
Support panels or any oversized workpiece
to minimize the risk of wheel pinching and
kickback.
Use extra caution when making a "pocket
cut" into existing walls or other blind areas.
Do not use type 1 abrasive wheels designed
for straight grinding.
Do not attempt to cut large stock or sheets
of metal as this machine is not designed to
be a dedicated cut-off machine.
Safety Warnings Specific for Sanding
Operations:
Do not use excessively oversized sanding
disc paper. Follow manufacturer's
recommendations, when selecting sanding
paper.