Do you have a question about the Saw-Max SM20 and is the answer not in the manual?
Questions and answers
Jeff k
April 3, 2025
I need the outer, and the inner washer for the Dremel saw Max. Where can I get this?
1 comments:
Mr. Anderson
May 14, 2025
The outer washer for the Dremel SM20 Saw-Max is shown in the manual as the "STANDARD OUTER WASHER" used with the cutting wheel and lock bolt. However, there is no specific mention of an "inner washer" in the provided context. You may need to check with tool parts suppliers or Dremel customer support for replacement parts.
General Power Tool Safety Warnings Read all safety warnings and all instructions. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE Work area safety power tool. Do not use a power tool while you are tired or under the influence of drugs, Keep work area clean and well lit.
Page 3
Disconnect the plug from the power source Keep cutting tools sharp and clean. and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Use the power tool, accessories and tool bits etc. in accordance with these instructions, Store idle power tools out of the reach of taking into account the working conditions children and do not allow persons unfamiliar...
Page 4
Wear personal protective equipment. Depending on application, use face shield, safety goggles or safety glasses. As appropriate, wear dust mask, hearing protectors, gloves and workshop apron capable of stopping small abrasive or workpiece fragments. The eye protection must be capable of stopping flying debris generated by various operations.
Page 5
Wheels must used only otherwise kickback may occur. recommended applications. For example: do not grind with the side of cut-off wheel. Do not restart the cutting operation in the workpiece. Let the wheel reach full speed and carefully reenter the cut. Always use undamaged wheel flanges that are of correct size and shape for your selected wheel.
Page 6
Additional Safety Warnings Do not use type 1A or 27A wheels for face grinding. Do not use AC only rated tools with a DC Some dust created by power power supply. sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm.
Page 7
Symbols IMPORTANT: Symbol Name Designation/Explanation...
Page 9
Functional Description and Specifications Disconnect the plug from the power source before making any assembly, adjustments or changing accessories. SM20 Dremel Saw-Max NOTE:...
Page 10
Assembly STANDARD FLAT WHEEL ASSEMBLy Disconnect the plug from the power source before making any assembly, adjustments or changing accessories. FLUSH CUTTING WHEEL ASSEMBLy...
DUST ExTRACTION (Optional accessory) Introduction INTENDED USE Operating Instructions PADDLE SWITCH WITH "LOCK-OFF" FEATURE...
Page 12
"LOCK-ON" BUTTON It is important to read and understand the section in this manual called “Kickback and Related Warnings”. DEPTH ADJUSTMENT LINE GUIDE...
Page 13
GENERAL CUT OFFS CUTTING TILE PLUNGE OR INTERIOR CUTS...
Maintenance Information Service Cleaning NO USER SERVICEABLE To avoid accidents always PARTS INSIDE. Preventive disconnect the tool from maintenance performed by unauthorized the power supply before cleaning or personnel may result in misplacing of performing any maintenance. internal wires and components which could cause serious...
Trouble Shooting TROUBLE: TOOL WILL NOT START PROBLEM REMEDy TROUBLE: WHEEL DOES NOT COME UP TO SPEED PROBLEM REMEDy TROUBLE: ExCESSIVE VIBRATION PROBLEM REMEDy TROUBLE: CUT BINDS, BURNS, STALLS MOTOR WHEN RIPPING PROBLEM REMEDy TROUBLE: WHEEL MARKS FLOORING WHILE FLUSH CUTTING PROBLEM REMEDy...
Need help?
Do you have a question about the Saw-Max SM20 and is the answer not in the manual?
Questions and answers
I need the outer, and the inner washer for the Dremel saw Max. Where can I get this?
The outer washer for the Dremel SM20 Saw-Max is shown in the manual as the "STANDARD OUTER WASHER" used with the cutting wheel and lock bolt. However, there is no specific mention of an "inner washer" in the provided context. You may need to check with tool parts suppliers or Dremel customer support for replacement parts.
This answer is automatically generated