Kickback And Related Warnings; Safety Warnings For Grinding And Abrasive Cutting-Off Operations - Dremel Saw-Max SM20 Operating/Safety Instructions Manual

Wear personal protective equipment.
Depending on application, use face shield,
safety goggles or safety glasses. As
appropriate, wear dust mask, hearing
protectors, gloves and workshop apron
capable of stopping small abrasive or
workpiece fragments. The eye protection
must be capable of stopping flying debris
generated by various operations.
Keep bystanders a safe distance away from
work area. Anyone entering the work area
must wear personal protective equipment.
Hold power tool by insulated gripping
surfaces only, when performing an
operation where the cutting accessory may
contact hidden wiring or its own cord.
Position the cord clear of the spinning
accessory.
Never lay the power tool down until the
accessory has come to a complete stop.
Do not run the power tool while carrying it
at your side.
Regularly clean the power tool's air vents.
Do not operate the power tool near
flammable materials.
Do not use accessories that require liquid
coolants.

Kickback and Related Warnings

Maintain a firm grip on the power tool and
position your body and arm to allow you to
resist kickback forces. Always use auxiliary
handle, if provided, for maximum control
over kickback or torque reaction during
start-up.
Never place your hand near the rotating
accessory.
Do not position your body in the area where
power tool will move if kickback occurs.
Use special care when working corners,
sharp edges etc. Avoid bouncing and
snagging the accessory.
Do not attach a saw chain woodcarving
blade or toothed saw blade.
Safety Warnings Specific for Grinding and
Abrasive Cutting-Off Operations:
Use only wheel
recommended for your power tool and the
specific guard designed for the
wheel.
The guard must be securely attached to the
power tool and positioned for maximum
safety, so the least amount of wheel is
exposed towards the operator.
types that are
selected