Table of Contents
Advertisement
COMSPHERE 3900 Series Modems
Cloning a Single TMp Remote
Press the F1 key to select Single Clone Remote.
The address field (xxx) displays the network management address of the modem that will receive
the download. The valid address field range is from 001 to 256.
To increment digits within the address field (xxx), use the
cursor ( _ ) under the digit that will be incremented. Press the F2 (") key to increment the digit.
Press Enter (Ent) to select the modem that will receive the download.
The password field (yyyyyyyy) displays the remote access password for the modem that will
receive the download.
To increment digits within the password field (yyyyyyyy), use the
the cursor ( _ ) under the digit that will be incremented. Press the F2 ( " ) key to increment the
digit.
Press Enter (Ent) to select the modem that will receive the download.
7-10
For Single download configurations, know the remote access password and the network
management address of the remote tributary modem that will receive the download. Refer
to the Misc section in Chapter 4 for a description of the remote access password
(RemAccssPasswrd) configuration option and the network management address
(NetMngmtAddress) configuration option.
For Multiple download configurations, ensure that the control modem's active poll list
contains all the network management addresses for the remote tributary modems that will
receive the download (refer to Chapter 6, Poll List Branch), and ensure that the tributaries
are responding properly to polls (refer to Chapter 9, Sub-Network Health and Status
Branch).
Choose DLL Type >
Single
Multiple
F1
F2
Choose Address:
"xxx
Ent
F1
F2
Choose Password:
"yyyyyyyy
Ent
F1
F2
September 1998
F3
F3
and
F3
keys to position the
and
keys to position
3910-A2-GN32-40
Advertisement
Table of Contents
