Program Button; Clock; Filter Cycle Start Time; Filter Cycle Duration - Dimension One Spas AQUATIC FITNESS SYSTEM 2003 Owner's Manual

Program Button

Clock:

Filter Cycle Start Time:

Filter Cycle Duration:

Aquatic Fitness System
2003 Owner's Manual
Program Button: The PROGRAM Button is used to set several
different functions including:
Programmable Item
Clock
Filter Cycle Start Time
Filter Cycle Duration
Number of Filter Cycles
Temperature Unit
Quit Program sequence
When you have successfully entered the programming sequence, the
word "PROGRAM" will be displayed in the LED Digital Display
Window.
You can now start to program your spa controls.
Program the Clock by pressing the PROGRAM button and holding
it for about 5 seconds. The LED Digital Display Window will display
the word PROGRAM and a digital clock with the HOUR setting
flashing. Use the UP or DOWN buttons to change to the correct
HOUR. When the HOUR is correct, press the LIGHT Button to
toggle to the MINUTES side of the time. Use the UP or DOWN
buttons to change to the correct MINUTES. When the MINUTES are
correct, press the LIGHT Button to toggle the AM/PM.
Program the Filter Cycle Start Time by pressing the
nd
PROGRAM Button a 2
filtration setting, the FILTER Icon will be displayed next to the word
PROGRAM in the LED Digital Display Window.
To adjust the Filter Cycle Start Time use the UP or DOWN buttons
to change to the correct HOUR. When the HOUR is correct, press
the LIGHT Button to toggle to the MINUTES side of the time. Use
the UP or DOWN buttons to change to the correct MINUTES.
When the MINUTES are correct, press the LIGHT Button to toggle
the AM/PM.
Program the Filter Cycle Duration by pressing the PROGRAM
rd
Button a 3 time. Whenever you are programming a filtration setting,
the FILTER Icon will be displayed next to the word PROGRAM in the
LED Digital Display Window.
To adjust the filter cycle duration use the UP or DOWN buttons to
change to the correct amount of time you want the filter to run.
Your choices are 60, 90, 120, 150, or 180 minutes. The factory
default is 60 minutes.
Program Button Action
Press & Hold 5 seconds
nd
2 Press
rd
3 Press
th
4 Press
th
5 Press
th
6 Press or wait 60 seconds
time. Whenever you are programming a
21