Product Identification; Product Features; Local Codes - Comfort Glow RADIANT FLAME RFN28TD Owner's Operation And Installation Manual

PRODUCT
IDENTIFICATION
Ignitor Button
Heater
Cabinet
Log
Figure 1 - Vent-Free Gas Log Natural Gas Space Heater

LOCAL CODES

Install and use heater with care. Follow all
local codes. In the absence of local codes,
use the latest edition of The National Fuel
Gas Code ANSI Z223.1, also known as
NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
104779
Note: Do not remove
Lighting and Warning
Plates from heater
Control Knob
UNPACKING
1. Remove heater from carton.
2. Remove all protective packaging ap-
plied to heater for shipment.
3. Make sure your heater includes two
hardware packets.
4. Check heater for any shipping damage.
If heater is damaged, promptly inform
dealer where you bought heater.
3
OWNER'S MANUAL
PRODUCT
FEATURES
Safety Pilot
Lighting and
This heater has a pilot with an Oxygen
Warning
Depletion Sensor Shutoff System (ODS).
Plates
The ODS/pilot is a required feature for vent-
free room heaters. The ODS/pilot shuts off
the heater if there is not enough fresh air.
Piezo Ignition System
This heater has a piezo ignitor. This system
requires no matches, batteries, or other
Screen sources to light heater.
Thermostatic Heat Control
This heater has a thermostat sensing bulb
and a control valve. This results in the great-
est heater comfort. This can also result in
Front
Panel lower gas bills.