Emerson PD5202 Owner's Manual page 14

7.) To begin programmed playback press the PLAY/
PAUSE button. The LCD display will show the
first programmed track and playback will begin on
that track. The PROGRAM Indicator flashes.
After the last programmed track has played the player
stops but the programmed tracks remain in the memory.
To play the programmed tracks again, press the
PROGRAM button and then the PLAY/PAUSE
To cancel the programmed sequence from memory, press the STOP
programming mode, open the CD door, or move the FUNCTION selector to the
POWER OFF position.
Program Repeat Playback
You can use the Program and Repeat features together
to continuously repeat a programmed sequence of
tracks. First, program the desired tracks according to
Steps 1 through 7 on pages 12-13. When Programmed
Playback begins press the REPEAT button twice to
activate the All Tracks Repeat feature. The REPEAT ALL Indicator appears in LCD
display and all the tracks in your programmed sequence will be repeated
continuously.
To cancel Programmed Repeat Playback press the STOP
PROGRAM and REPEAT Indicators go ' Off' .
PD5202_ib103003.p65
13
13
button.
button until both the
30/10/2003, 10:01
button at