Programmed Playback - Emerson PD5202 Owner's Manual

PROGRAMMED PLAYBACK

You can program up to 20 tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is playing
press the STOP
steps below.
1.) Move the FUNCTION selector to CD, insert your disc in the player, close the
door, and wait until the total track number appears in the display.
2.) Press the PROGRAM button once. The PROGRAM
Indicator and program memory "00" begin flashing
in the display.
3.) Use the /
be programmed. (Example: Track 08).
4.) When track number "08" flashes in the display, press
the PROGRAM button once again to enter the track
"08" in program memory number "01". Track number
"08" disappears and "00" flashes again in the display,
indicating that you may now select a track to be
entered in program memory number "02".
5.) Use the or
the desired track number appears in the display press the PROGRAM button
again to enter that track in the program memory.
6.) Repeat Step 5 until you have entered up to 20 tracks
in the program memory. When the memory is full,
the "– –" and "PROGRAM" flashes in the LCD
display
PD5202_ib103003.p65
button to stop playback before you begin the programming
buttons to select the first track to
buttons to select the next track to be programmed. When
12
12 30/10/2003, 10:01