Basic Connections; Important Information; Connecting An Av Receiver - Denon DBP-1611UD Owner's Manual

Basic connections

Important information

• Connect this unit as follows before using. Make connections according to the equipment you are
connecting.
• Some settings of this unit may be necessary depending on the connection method. Check each
connection item for more information.
• Select the cables (sold separately) according to the components being connected.
NOTE
• Do not plug in the power cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components being
connected.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with connection cables. Doing so can result in noise.

Connecting an AV receiver

For connecting using an HDMI cable, see "Connect" (vpage 4). This section describes the connections
not using an HDMI cable.
Connecting to an AV receiver with an analog 2-channel audio
input terminal
• This connection is recommended when the specifications of an AV receiver connected to the unit are
as follows:
• Not supporting HDMI input
• Not supporting digital audio(coaxial) input
• Select the connector to use and connect the device.
Cables used for connections
Audio and video cable
(White)
L
Audio and video
cable (Red)
R
(supplied)
(Yellow)
Video cable
(Green)
Component video
cable
(Blue)
(sold separately)
(Red)
L
R
AV receiver
AUDIO
L
L L
R
R R
VIDEO
VIDEO IN
COMPONENT
VIDEO IN
Y
P
B
P
R
ENGLISH
9