Engineering Data - Delta Electronics DRP024V060W1BA Manual

Engineering Data

 Derating Curve (Both of Horizontal and Vertical)
Model: DRP024V060W1BA
o
Note:
1. Do not use the device in areas outside
of the shaded portion shown in the
above graph.
gradually deteriorate
damaged.
2. Based on the above graph, if the
ambient temperature is greater than
50°C, the output capacity has to be
reduced by
temperature increase. If not, the device
will go
protection by switching off i.e. device
will go into bouncing mode. It will
6/13
1/10/2011
Switch Mode Power Supply
110%
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
-20 -10 0
Internal parts
and become
2.5% per Celsius
into over-temperature
10 20 30 40 50
Ambient Temperature (C)
recover
drops to 50°C or output capacity is
may reduced as recommended in the graph.
3. If the device has to be mounted in any
other direction, please contact your
service provider for more details.
4. In order for the device to function in
the manner intended, it is also
necessary to observe a lateral spacing
of 2cm from other equipments.
5. Depending on the ambient temperature
and output capacity of the device, the
device housing can be very hot!
60 70 80
when ambient
DRP024V060W1BA
temperature
Rev: 00,