Introducing the Web Configurator
This chapter describes how to access the prestige web configurator and provides an overview of its
3.1
Accessing the Prestige Web Configurator
Step 1.
Make sure your Prestige hardware is properly connected (refer to instructions in Chapter 2).
Step 2.
Prepare your computer/computer network to connect to the Internet (refer to the Preparing Your
Network portion of the Quick Start Guide).
Step 3.
Launch your web browser.
Step 4.
Enter 192.168.1.1 as the URL.
Step 5.
Enter "1234" (default) as the password and click Login. In some versions, the default password
appears automatically – if this is the case, click Login. You should see a screen asking you to
change your password (highly recommended).
Step 6.
Either enter a new password (and retype it to confirm) and click Login or click Ignore.
Step 7.
You should now see the MAIN MENU screen.
Congratulations, you have successfully accessed the web configurator. Refer to the next section for a
summary of how to navigate the web configurator.
The Prestige gives priority of use on a "first come, first serve" basis. That is, if you
have already connected to your Prestige via the web configurator, you will not be
logged out if another user logs in to the Prestige and vice versa.
The Prestige automatically times out after five minutes of inactivity. Simply log
3.2
Navigating the Prestige Web Configurator
The following summarizes how to navigate the web configurator from the MAIN MENU screen.
Introducing the Web Configurator
Prestige 304 Broadband Sharing Gateway with 4-Port Switch
back into the Prestige if this happens to you.
Chapter 3
functionality.
3-1