Binatone Lyris 710 User Manual page 6

Desk/Wall mounting continue...
Insert the rigid clips of the stand into the slots
on the bottom of the phone (nearer the centre of
the base). Press down firmly until the flexible
clips clicks into place.
To remove the stand, (1) pinch the flexible
clips, (2) pull back the stand, and then (3)
slide up and forward as shown below.
Mark two points on the wall that are 92 mm
apart to lay the fixing centers as shown below.
BE CAREFUL to check that there are no
electrical wires hidden in the wall.
Fix two screws (7mm head screws required, not
leaving
supplied) at the marked locations,
approximately 7mm between the wall and the screw
head.
Hang the telephone on the screws using the
wall mount slots. You may need to remove the
telephone from the wall and tighten the
screws so that the Telephone is securely fixed and
does not wobble. Place the Handset on the
cradle with the parking hook on the cradle
arranged to fit in the parking recess under the
earpiece on the Handset.
Binatone Help Line - 0845 345 9677
Calls are charged at Local Call rate.
6