Binatone Lyris 710 User Manual page 30

Troubleshooting continue...
If the fault persists ...
Disconnect all other instruments connected to the
same line as the
can make a call.
Disconnect the Base unit from the telephone line
and plug a different phone into the master telephone
socket. Try making a call. If this works, the line is OK.
If the call does not work, and you are using a two-
way socket adapter, remove it and plug a telephone
directly into the socket. If the call now works, the
adapter may be faulty.
If you cannot make a call, the fault may be on the
exchange line. Contact the service provider (the BT
engineers on 151, or your cable company).
If you still cannot identify the cause of the problem,
contact the Binatone Help Line on 0845 345 9677
Calls are charged at Local Call rate.
Connection and conditions for use
You can connect your Lyris 710
connected to a local exchange, with its own phone number; to an extension
socket connected to a DEL; or to an extension on an approved compatible
PBX. Do not connect the
The ringer equivalence numbers (RENs) of all instruments (phones, fax
machines, etc.) connected to an exchange line must not add up to more than
4 - otherwise, one or more of them may not ring and/or answer calls correctly.
The Lyris 710 has a REN of 1, and most other telephones have a REN of
1 unless marked otherwise.
If you need help ...
The Binatone Help Line is available from 9.00 am to 5.00 pm,
0845 345 9677
on Calls are
Pressing buttons on your phone
When the instructions in this user guide tell you simply to 'press' a
button, this means that you should press the button briefly, then
release it.
When the instructions tell you to 'press and hold' a button, this means
you should keep the button pressed until the display changes and/or you
hear a tone.
Binatone Help Line - 0845 345 9677
Lyris 710 and see whether you
to a direct exchange line (DEL) - a line
Lyris 710 as an extension to a payphone.
charged at Local Call rate.
Calls are charged at Local Call rate.
30
Monday to Friday,