Emerson CKD1137 Owner's Manual page 11

Setting The Wake Up Times
The unit has two separate wake up alarms that can be set and used independently.
1.) Press the ALARM 1 or ALARM 2 button once. The display will change from
the respective time of the day to wake up time and begin flashing.
The AL. 1 or AL. 2 indicator comes ' On' .
2.) Press the HR. button to set the wake
up hour. Set correctly for AM or PM.
Press the MIN. button to set the minute
correctly.
3.) Press the respective ALARM button once.
The Alarm time is set.
The display returns to correct time.
Notes:
• After you press the ALARM 1 or ALARM 2 button, you must press the
HR. or MIN. buttons to adjust the alarm time within 5 seconds, while the
alarm display is still flashing. After 5 seconds the alarm time stops flashing
and the display returns to the correct time. If this occurs, press the desired
Alarm button again until the alarm time display begins flashing and make
your alarm time adjustments while the display is flashing.
• After you have adjusted the wake-up time the alarm is set automatically.
The AL1 and/or AL2 indicators will be ' On' . To deactivate the alarms press
the ALARM 1 and/or ALARM 2 buttons once. The AL1 and/or AL2 indicators
will go ' Off' .
CKD1137_053105.p65
10
10
RANDOM POWER
PROGRAM REPEAT
PM
AL. 1
RANDOM POWER
PROGRAM REPEAT
PM
AL. 1
1/6/2005, 14:22
FM ST.
AL. 2
FM ST.
AL. 2